Skip to product information
1 of 1

Silk Road Treasures

Vintage Hexagonal Bronze Jewelry Die – Stars, Flowers & Paisley Sampler

Vintage Hexagonal Bronze Jewelry Die – Stars, Flowers & Paisley Sampler

Regular price $80.00 USD
Regular price Sale price $80.00 USD
Sale Sold out
Shipping calculated at checkout.
Quantity

A hexagonal bronze die covered with dozens of small designs, ready to press the stars, flowers and drops a silversmith needs to build a piece of jewelry.

A sunburst rosette with a domed center sits at the heart of the die. Around it are daisies and scalloped flowers, five-, six- and eight-point stars, quatrefoils, a heart with a scrolling design, a large paisley leaf and a ring of teardrops near the edges, with tiny ring-and-dot circles in between. Each shape could be pressed, cut out and soldered onto a larger piece, which is how smiths built up richly decorated pendants and earrings from small parts.

A craft more than 2,000 years old. Pressing thin metal into a carved bronze die is one of the oldest ways of making jewelry. In the 1st century BCE, jewelers in the Dacian capital of Sarmizegetusa Regia, in today's Romania, used a hexagonal bronze matrix covered with designs to press sheets of precious metal into ornaments, and bronze was so valuable that they cut designs into every face of it. About 1,500 years ago, goldsmiths in northern Europe made gold pendants called bracteates the same way, laying gold sheet over a bronze matrix and striking it through a layer of lead or wood.

How silversmiths used it. Silversmiths in India and Afghanistan carried the technique into modern times. The smith heats a sheet of silver until it glows red, quenches it in water to soften it, lays it over the die and covers it with a thick sheet of lead. A few heavy hammer blows drive the silver into every recess of the die, and when the lead is lifted away, the design stands out in crisp relief. The pressed shapes are then cut out and soldered into pendants, amulets and other jewelry, often finished with borders pressed from other dies. In India, a jeweler's die like this is called a thappa, a word for a stamp.

Using it today. These dies are collected as working tools of a fading craft and as small works of art in their own right. Metalsmiths can still press annealed silver, copper or brass sheet into them, and artists use them to texture metal clay and polymer clay. On a small stand or in a shadow box, a die makes a striking display piece.

One of a kind: each die was cut by hand and shows years of use at the bench, so no two are alike. You'll receive the exact die pictured.

Details

  • Material: bronze
  • Shape: hexagon
  • Size: approx. 2-9/16 in wide x 2-5/16 in tall (6.5 x 5.9 cm)
  • Thickness: approx. 1/4 in (6 mm)
  • Measurements are approximate, to within about 1/16 in
  • Age: vintage to antique; exact date unknown
  • Condition: warm golden bronze with reddish-brown patches and dark patina in the recesses; general wear from use
  • One of a kind: only one available
  • Not for use with food

Explore more vintage bronze jewelry dies.

View full details